How to Read a Gemstone Lab Report (GIA, GRS and Pakistani Labs)
By Ali Raza · Updated 6 November 2026
A gemstone lab report looks official, with a logo, a hologram, a photograph and a block of technical wording. Most buyers glance at the word "natural" and put it in a drawer. That's a pity, because the useful information is usually in the smaller lines: the treatment comment, the measurements and the notes on the back. This guide walks through a gemstone lab report section by section, using international labs such as GIA and GRS and the local testing labs in Pakistan's larger cities as examples, so you can read one properly before you pay for a stone.
We name labs here only as examples of the kind of report you'll meet. RareGems has no partnership with any laboratory.
What is a gemstone lab report?
A gemstone lab report is a laboratory's written opinion about one specific stone, based on instrument testing. It states what the stone is, whether it's natural or synthetic, any treatment detected and its measured details. It isn't a valuation, a guarantee of quality or a price certificate, and it describes the stone only as it was on the day it was tested.
In Pakistan most people call it a "certificate", and you'll hear "certificate wala pathar" at every counter. The word matters less than what's printed on it. A one-line slip from an unknown source and a full report from a recognised laboratory are both called certificates, but they carry very different weight.
The sections of a typical report
Layouts differ between labs, but nearly every report covers the same ground. Here's what each part means and what to check against the stone in your hand.
| Section | What it says | What to check |
|---|---|---|
| Report number and date | A unique reference and the date of testing | That the number can be verified with the lab, and that the date makes sense for the stone's history |
| Identification | Species and variety, such as "natural corundum, blue sapphire" | That the species matches what you're being sold (Neelam should read corundum, Zamurd should read beryl) |
| Weight | Carat weight, usually to two decimal places | Weigh the stone; it should match closely |
| Measurements and shape | Length, width and depth in millimetres; cut style | Measure with a gauge or ask the seller to; a mismatch is a warning |
| Colour | A short description, sometimes with a trade term | Treat colour names as descriptive, not as a grade |
| Comments or treatment | Heating, oiling, filling, diffusion or "no indications of" any of these | This line often decides the price; read it slowly |
| Origin (optional) | The lab's opinion on geographic origin | Whether it's included at all, and the exact wording |
| Photograph and security features | An image of the stone, plus holograms, QR codes or embossing | That the photo shows the same shape and colour as your stone |
The back of the report usually explains the lab's terms and limitations. It's dull reading, but it tells you what the lab does and doesn't stand behind.
How do you read natural versus treated wording?
Start with the identification line, which should say "natural" before the species, then go straight to the comments. "No indications of heating" means the lab found no evidence of heat treatment. "Indications of heating" or "heated" means it did. Anything about fillers, glass, oil or diffusion is a treatment disclosure, and it should be reflected in the price.
A few phrases cause most of the confusion:
- "Natural" in the identification line means the stone formed in the earth rather than in a factory. It doesn't mean untreated. A heated Neelam is still a natural sapphire.
- "No indications of heating" is the wording most buyers of unheated sapphire and ruby are looking for. It's a finding that no evidence was detected, which is why labs phrase it carefully.
- "Heated" or "indications of heating" is common and stable for corundum. It's not a defect, but it moves the stone into a different price bracket. Our page on heated vs unheated stones explains why.
- Clarity enhancement in emerald is usually graded by degree, from insignificant or minor through moderate to significant. Minor oil is normal for Zamurd. Significant filling deserves a much lower price.
- Glass-filled, lead-glass or composite means the stone has been heavily treated with glass to hide fractures. Treat it as a different product altogether.
- Short codes such as "H" or "NTE" appear on some reports. Look for the key that explains them, usually on the reverse.
Why do origin opinions vary between labs?
Origin is an opinion, not a measurement. A lab compares a stone's inclusions, trace elements and spectra with reference samples from known mines, then states where the evidence points. Different labs hold different reference collections and use different thresholds, so two respected labs can occasionally give different origins for the same stone, or one may decline to give any.
That's why origin is optional on most reports and usually costs more. Watch the wording too. "Origin: Sri Lanka" and "gemmological evidence suggests Sri Lanka" carry the same broad meaning, but some labs add qualifiers when the evidence is less clear. If a seller talks about Kashmir or Burma and the report doesn't mention origin at all, the origin claim is the seller's, not the lab's. Our gemstone origins page covers why named origins affect price.
Origin matters most for blue sapphire, ruby and emerald. For stones such as agate, quartz or most garnets, labs rarely offer origin at all, and you shouldn't pay a premium for one on those species.
International and Pakistani labs: what's the difference?
International laboratories such as GIA and GRS are widely recognised abroad, issue detailed reports and are the usual choice for high-value sapphire, ruby and emerald where heat or origin matters. They're slower and cost more, and the stone often has to travel. Local gem testing labs in cities such as Lahore, Karachi and Peshawar are quicker and more affordable, and they're well suited to identification and basic treatment checks on everyday stones.
Neither is automatically "better". A local report on a modestly priced yellow agate is sensible. An international report on the same stone usually isn't, because the fee could be close to the price of the stone. For an expensive unheated Pukhraj, an international report is often worth asking about. The lab certified gemstones page compares the two in more detail.
How do you verify a report number?
Most recognised labs let you check a report number through their own online lookup or by contacting them directly. Enter the number and compare what comes back with the paper: weight, measurements, shape, colour and treatment comment. If the lab's record doesn't match, or the lab has no record, the report shouldn't be trusted, however good it looks.
A few extra checks are worth the minutes they take:
- Weigh and measure the stone. A report describes one stone. If the weight or millimetre size is off by more than a tiny margin, it may describe a different stone.
- Compare the photograph. Shape, cut and general colour should match, even if lighting differs.
- Look for alterations. Overwritten numbers, mismatched fonts and photocopies are red flags.
- Check the date. A very old report may predate re-cutting or later treatment.
- Use contact details you found yourself. Don't rely on a phone number printed on the report to confirm it.
If you can't verify a report, our gemstone testing service can help you arrange a fresh test.
What a report won't tell you
A lab report doesn't grade beauty, put a price on the stone or say whether it suits you. Two stones with identical reports can look quite different in daylight: one lively, one dark and sleepy. That's why we still photograph each stone individually and describe it in plain words. Our how we grade page explains that in-house check, which is ours and not independent.
A report also doesn't cover anything done to the stone after testing. If it has been re-cut, re-polished or treated since, the report no longer describes it accurately.
Natural · Inspected
Natural · Inspected
Natural · Inspected
Browse: All Sapphire · All Ruby · All Yellow Sapphire
Can I get a lab report for a RareGems stone?
Yes. Any stone in our shop can be sent for an independent lab report on request. The lab fee is charged separately, on top of the stone's price, and we confirm the fee and the type of lab with you before the stone goes for testing. Stones already carrying a report are tagged as such on their listing.
Tell us what you need confirmed, identity and treatment only or origin as well, and we'll suggest which kind of lab suits the stone and your budget. If you're still choosing a stone, a gemstone consultation is a good place to start. Every order is delivered within Pakistan on Cash on Delivery with open-and-inspect, and our 7-day return applies as usual.
خلاصہ
لیب رپورٹ میں سب سے اہم حصہ ٹریٹمنٹ کا تبصرہ، وزن اور پیمائش ہے، صرف "نیچرل" کا لفظ کافی نہیں۔ اوریجن لیب کی رائے ہوتی ہے، اس لیے مختلف لیبز میں فرق ہو سکتا ہے۔ رپورٹ نمبر ہمیشہ لیب سے خود تصدیق کریں، اور RareGems سے لیب سرٹیفکیٹ کی فیس الگ سے لی جاتی ہے۔